Studies on the electrical conductivity and galvanomagnetic characteristics of short carbon fibre filled thermoplastic elastomers

The electrical resistivity of short carbon fibre filled thermoplastic elastomers based on natural rubber-high density polyethylene (NR-HDPE) blend and styrene-isoprene-styrene (S-I-S) block copolymer has been studied by varying the concentration of fibre from the 0 to 40 phr level. A sharp drop in resistivity is observed in both cases after a critical concentration of fibre is reached, with the S-I-S system showing lower values of critical concentration. At higher concentrations, experimental values of the electrical conductivity agreed reasonably well with the calculated values from a theory based on the probability of formation of a conductive network. The effect of temperature on the resistivity of the composites has also been investigated in a temperature range of 27–120 °C and 27–90 °C for the NR-HDPE system and S-I-S system, respectively. The type of carrier in both the composites is found to be n-type, i.e. electrons, and the activation energy of hopping of the electrons for both the systems has been calculated. A Hall effect study has also been carried out to determine the carrier concentration and drift mobility of both the composites.     

A PROCEDURE FOR THE PRODUCTION OF ULTRA-PURE PRECURSORS FROM COAL FOR THE MANUFACTURE OF VALUE-ADDED CARBON PRODUCTS - TREATMENT OF THE RESIDUE

Solvent extraction of coal results in a coal-derived extract containing the solvent-soluble organic portion of coal free of almost all mineral matter. A residue is also produced and consists of most of the mineral matter. Although a procedure has been developed to manufacture ultra-pure coke precursors for value-added carbon products from coal-derived extracts, treatment/rc-usc of the residue is necessary to make the process economically attractive and environmentally friendly. In this study, a technique has been developed to beneficiate the residue by specific gravity fractionation. It is found that nearly 70 % of the residue can be separated into a fraction containing less than 3.5% ash for a typical WV bituminous coal using an organic liquid having a specific gravity of 1.5. This treatment enables the residue to serve as a low-ash boiler fuel or a suitable precursor for the manufacture of materials such as activated carbons. Consequently, the potential for coal-derived precursors leading to new and non-conventionai marketable carbon products can be realized easily.     

Electron transport in highly compensated,plastically bent,n-type InSb in the temperature range 4.2–300 K

Measurements of the Hall coefficient, dc electrical conductivity, and magnetoresistance have been made on two highly compensated, plastically bent,n-type InSb samples from liquid helium to room temperature. The number and Hall mobility of charge carriers and the electrical conductivity are greatly affected by plastic bending. The mobility decreases appreciably and the number of charge carriers increases in both the deformed samples. This increase of effective charge carriers can be attributed to the introduction of effective donor centers due to plastic bending. The electrical conductivity in one of the deformed samples increases between the temperature ranges 4.2–15 K and 125–190 K compared to that of the undeformed state of the sample. This unusual increase in is attributed to the large increase inn value. The magnetoresistance at 4.2 K is due to impurity-band conduction and is found to be positive. It shows approximately a linear variation with magnetic field in both the deformed samples. The observed behavior of the magnetoresistance at 300 K is consistent with the behavior expected for free electrons. The observed / at 77.4 K is found to be less than that at 300 K and is explained in terms of the Hall mobility values at these two temperatures.     

A multi-echelon production–inventory system with supply disruption

The article investigates an integrated multi-layer supply chain model consisting of supplier, manufacturer and retailer while supply disruption, machine breakdown, safety stock, maintenance breakdown occur simultaneously. At beginning of the production, manufacturer keeps some raw materials in stock received from second supplier at high price, as safety stock due to supply disruption of first supplier. Corrective maintenance is done immediately to restore its normal stage when machine breakdown occurs. Stock out situations at manufacturer and retailer are considered due to disruption of production for machine breakdown. The integrated expected costs of the chain in centralized (collaborating) and decentralized (Stakelberg approach) system are compared. A numerical example and its sensitivity analysis are provided to test feasibility of the model.     

Avalanching flow of cohesive powders

The flow dynamics of cohesive powders is investigated in rotating cylinders with an L : R ratio of 3 : 1 using experiments and DEM simulations. Flow onset and steady-state behavior are compared for free-flowing (cohesionless) dry glass beads, wet glass beads, and “dry” cohesive powders (lactose, microcrystalline cellulose). The avalanching dynamics of powders is substantially different from those observed for free-flowing or wet-cohesive glass beads. Dry cohesive powders exhibit history-dependent flow dynamics, significant dilation, aperiodic avalanche frequencies, and variable avalanche size. These behaviors also provide a route for effective characterization of cohesive forces under dilated conditions characteristic of unconfined flows.     

Three stage trade credit policy in a three-layer supply chain–a production-inventory model

The main purpose of this paper is to investigate the optimal replenishment lot size of supplier and optimal production rate of manufacturer under three levels of trade credit policy for supplier–manufacturer–retailer supply chain. The supplier provides a fixed credit period to settle the accounts to the manufacturer, while the manufacturer gives a fixed credit period to settle the account to the retailer and the retailer, in turn, also offers a credit period to each of its customers to settle the accounts. We assume that the supplier supplies the raw material to the manufacturer and sends back the defective raw materials to the outside supplier after completion of inspection at one lot with a sales price. The system always produces good items in the model. Also, we consider the idle times of supplier and manufacturer. Finally, numerical examples are provided to illustrate the behaviour and application of the model with graphical simulation.     

Two‐echelon manufacturer–retailer supply chain strategies with price,quality, and promotional effort sensitive demand

This study deals with the two‐layer supply chain model of one manufacturer and one retailer for a single commodity where market demand is assumed to be dependent on selling price, quality of the products, and promotional effort of the retailer. We investigate the behavior of the supply chain under centralized, manufacturer Stackelberg, conditional manufacturer Stackelberg, retailer Stackelberg, conditional retailer Stackelberg, and vertical Nash model structure. The nature of the above models provides great insights to a firm's manager for achieving optimal strategy in a competitive marketing system. Quite often, not all items produced in a firm are of perfect quality; some are perfect (conforming) quality and others are imperfect (nonconforming) quality. The nonconforming products are sold in a secondary shop or by other retailers. The procurement cost of finished products depends on the quality of the products due to more investment in advanced technology, better raw materials, and skilled labor, etc. The warranty policy for the products is also imposed to attract the customers to buy more. Here, both members (manufacturer and retailer) jointly share the cost of the warranty policy. The objective of this paper is to determine the optimal selling price and promotional effort of the retailer, while the optimal wholesale price and quality of the products are determined by the manufacturer so that the above strategies are maximized. Finally, numerical examples with sensitivity analysis of the key parameters are illustrated to investigate the proposed model.     

Two-stage database intrusion detection by combining multiple evidence and belief update

Insider threats have gained prominence and pose the most challenging threats to a database system. In this paper, we have proposed a new approach for detecting intrusive attacks in databases by fusion of information sources and use of belief update. In database intrusion detection, only intra-transactional features are not sufficient for detecting attackers within the organization as they are potentially familiar with the day-to-day work. Thus, the proposed system uses inter-transactional as well as intra-transactional features for intrusion detection. Moreover, we have also considered three different sensitivity levels of table attributes for keeping track of the malicious modification of the highly sensitive attributes more carefully. We have analyzed the performance of the proposed database intrusion detection system using stochastic models. Our system performs significantly better compared to two intrusion detection systems recently proposed in the literature.     

Self adaptive animation based on user perspective

In this paper we present a new character animation technique in which the animation adapts itself based on the change in the user’s perspective, so that when the user moves and their point of viewing the animation changes, then the character animation adapts itself in response to that change. The resulting animation, generated in real-time, is a blend of key animations provided a priori by the animator. The blending is done with the help of efficient dual-quaternion transformation blending. The user’s point of view is tracked using either computer vision techniques or a simple user-controlled input modality, such as mouse-based input. This tracked point of view is then used to suitably select the blend of animations. We show a way to author and use such animations in both virtual as well as augmented reality scenarios and demonstrate that it significantly heightens the sense of presence for the users when they interact with such self adaptive animations of virtual characters.